Product Package: MXT03 Host + Water Quality Sensor

Product Overview

Water quality monitoring is primarily conducted through two approaches: real-time online monitoring and manual sampling followed by laboratory analysis. Manual sampling suffers from limitations such as small sample sizes, discontinuity, and delayed response, making it inadequate for real-time monitoring and yielding unreliable data. In contrast, automated online water quality monitoring offers a higher sampling frequency, enabling the timely, accurate, and reliable acquisition of indicators that reflect trends in water quality.

MXT03 The online water quality monitor for drainage networks is a device used for monitoring water quality in drainage pipeline systems. This dedicated device is designed with a ultra-low-power microcontroller, features built-in battery power and network communication, and enables monitoring at remote sites without the need for external power or fiber-optic cabling. of the pipeline network drainage water quality Real-time data acquisition. The sensor employs electrode-based sensors that require no reagents and allows for the replacement of the front-end electrodes according to monitoring requirements.

Product Features

● In compliance with the SL651-2014 Hydrological Monitoring Data Communication Protocol – Communication Protocol

● Adopt 32-bit ultra-low-power microcontroller, with a standby current of less than 100uA

● Powered by a single-use, high-capacity battery; under standard operating conditions, the battery replacement cycle is no less than one year.

● IP68-rated design, resistant to water ingress.

● Built-in temperature and humidity sensor, continuously monitoring the environmental conditions inside the chassis.

● Built-in attitude sensor; when the device is moved illegally, it automatically sends an alert to the platform.

● Equipped with electrode-type water quality sensors and optionally featuring an automatic self-cleaning system, the monitoring parameters are: pH, temperature, electrical conductivity, ORP, suspended solids concentration, ammonia nitrogen, COD, and other parameter indicators

● The sensor is equipped with a built-in cleaning system that automatically initiates a self-cleaning cycle at scheduled intervals.

● Supports remote parameter configuration and monitoring, as well as remote device maintenance.

● Supports mobile phones Configuration and maintenance are performed on-site via the app.

● Supports private network communication and can simultaneously report to four central stations.

● Able to store the most recent One year of monitoring data, with a blind-spot reporting function.

● The magnetic switch enables one-touch power on/off, eliminating the need to open the cover.

Technical Specifications

Installation Site Photos